Solution Graphics

Send a donation
to Clever Models

Discussion > board and batten

Hi
just downloaded the board and batten texture. Is this available without the cross boards. I know they can probably be photo shopped out but I don't know how to do this

Thanks
Dick
May 30, 2017 | Unregistered CommenterDick Green
Dick, not sure which texture you are referring to P/N 26, P/N 206, P/N 205
If you tell me what you need it for or how you want to use it, I may be able to redirect you to a solution.
May 31, 2017 | Registered CommenterThom
Thom, I'm sure Dick is referring to P/N 26. The horizontal boards separating the B&B sections is what he doesn't want, just one large piece of B&B. Since the pattern repeats every section, this might be more than what you want to do.
June 1, 2017 | Unregistered CommenterDave Miecznikowski
Hi thom

I guess I wasn't too clear with my question. The sections in the texture are Only 7 feet tall. Having been a professional Sider for 20 years I can tell you that we usually use board that are 10 to 12 feet long. This way walls that are 8 or 9 feet tall will not have horizontal seams. and tall gables will have no seams. My suggestion is to eliminate the horizontal boards or make the sections longer.

Refer to the picture of the gold mine building. This is how it would look if I were siding this building. Boards go from foundation to top of walls. and gables have no seam.

Hope this helps.

Thanks

Dick
June 1, 2017 | Unregistered CommenterDick Green